Installation Services

McDonald Leisure offers various installation services from supply and assistance for self builds through to complete installations.

Whether it's a pool, spa, sauna or steam room, we can provide the necessary advice, equipment, expertise and skilled labour to complete the project successfully on time and on budget.

Some examples of previous installations are listed below.

One-Piece Pool Installation

Foundations were excavated approximately 50cm wider than the one-piece pool shell. A reinforced concrete floor was then laid and swept clean before receiving the pool shell.







Starline Pool shell arrives on Starline's specially adapted lorry. It's highly manoeuvrable with reverse axel steering and tilting to allow it to squeeze through the narrowest of gaps.







Lorry with built in crane used to offload pool shell and position on concrete foundations.








Pool shell being positioned accurately along guide strings by the man in the blue boiler suit. He is using a remote control to operate the crane.







Most of the pool fittings are already fitted in this type of pool, sump, returns, vacuum point etc. The rest of the fittings were then installed, pool lights, skimmers, automatic pool cover.

All pipe work was then connected and pressure tested back to the proposed site of the plant room.

The pool was then filled with water and back filled at the same time to keep the pressure even on both sides of the shell.

The pool was then filled with water and back filled at the same time to keep the pressure even on both sides of the shell.

Once the house was finished the plant room was then installed and the pool commissioned into operation.